
Enhancing road infrastructure with a reinforced soil wall
Overview
The Kanaka Durga temple, located on Indrakiladri Hill along the Krishna River in Vijayawada, Andhra Pradesh, India, is a popular religious site that attracts millions of worshippers annually. However, the existing road, constructed in 1969, was insufficient to handle the increasing heavy traffic. To address this issue, Solmax sought technical assistance and utilized their expertise to find an economical solution for widening the road. After careful analysis, it was determined that a segmental retaining wall using MIRAFI® Polyfelt® PEC was the most suitable option compared to alternatives such as building a bridge or excavating the hill.
Solution
The 22 m (72.2 ft) high wall was divided into two tiers: a 12 m (39.4 ft) tier and a 10 m (32.8 ft) tier, with a 5 m (16.4 ft) offset, designed according to BS8006 standards. The top tier was individually designed to accommodate traffic load, while the bottom tier considered both the full surcharge of 10 m (32.8 ft) and the traffic load from the upper tier. Locally available murum soil with a friction angle of 32 degrees was used as backfill material.
For reinforcement, a composite geotextile was employed, consisting of high-strength polyester yarn incorporated into a non-woven continuous fiber geotextile. This geotextile provided both tensile strength and drainage functionality. The tensile strengths of the reinforcement layers ranged from 50 kN/m (286 lb/ft) to 200 kN/m (1,143 lb/ft).
In this project, the high-strength geotextile reinforcement layers were installed at an inclined angle for improved pullout resistance. Additionally, all reinforcement layers were anchored at the far end in a trench that was backfilled with soil for tensioning.
Kanaka Durga Temple, Vijayawada, India MIRAFI Polyfelt PEC

Kanaka Durga Temple, Vijayawada, India MIRAFI Polyfelt PEC

Kanaka Durga Temple, Vijayawada, India MIRAFI Polyfelt PEC
Kanaka Durga Temple, Vijayawada, India MIRAFI Polyfelt PEC
More case studies
View all
Providing long term stabilization for drainage channel
PROPEX Armormax and PROPEX Pyramattress, an engineered mattress system that uses PROPEX Pyramat 75 HPTRM to construct a geosynthetic/soil/rock composite for protection of channels, slopes, and spillways.

Steep slope stabilization at SR-11 KYTC DISTRICT 10
The PROPEX Armormax system helped KYTC meet their goal of providing a safe, efficient, environmentally sound and fiscally responsible option to repair the slope while also ensuring access to the state park and economic growth in the surrounding area.

Providing levee resilience and durability
Full scale installation of the EEAS began in 2015 and has since been installed on over 100 miles of earthen levees in the New Orleans area. Since installation, multiple levees have experienced overtopping from major hurricanes, but have not breeched.