Do you care if it leaks?
The degree of dryness depends on several key factors:
Quick drying is essential when:
The slurry in the tubes needs reprocessing for mineral extraction.
Tubes form the base layer for structures like stacked containments.
However, if the slurry remains within a GEOTUBE® unit, immediate drying isn't as crucial. Such slurries are stable and won't rehydrate or leak, even in harsh weather.
Different slurry types have varying solid concentrations. The table below (not provided) shows typical concentrations and potential dryness improvement after a pump cycle. Ultimate dryness, however, is weather-dependent. Nonetheless, GEOTUBE dewatering technology consistently offers enhanced dryness, reducing overall volumes.
The GEOTUBE dewatering unit's design should match the slurry type and volume. For instance, granular slurry behaves differently than biosolid waste inside the tubes. Hence, while standard tubes work for some projects, others might need custom-designed tubes for even filling and maximum solid capture.
Polymers can enhance the dewatering process by binding particles and allowing clear water to pass through the tube fabric. Testing can determine the best polymer type and dose for optimal dewatering. GEOTUBE systems generally require less polymer than mechanical dewatering systems.
In tropical climates, dewatering can continue even during rain. GEOTUBE contents remain stable during rainfall, whereas sunny weather expedites drying. For large-scale projects, a pilot tube trial can help predict the achievable dryness and dewatering duration.
This system efficiently retains solids in various slurry types. The size of GEOTUBE units can range from small bags to massive containers holding over 3,000 m³ (105,944 ft³) of dry cake. To confirm the ideal solid concentration and polymer dosage, preliminary tests, such as the Rapid Dewatering Test or GEOTUBE Dewatering Test, can be helpful.
