ENTERTAINMENT CITY, PARANAQUE, PHILIPPINES
CONTAINER YARD, KLANG, MALAYSIA
CONTAINER YARD, KLANG, MALAYSIA
Omega Mine extends AMD treatment capacity with dewatering
At Omega Mine in West Virginia, GEOTUBE® GT500 units help the West Virginia Department of Environmental Protection treat and dewater acid mine drainage from abandoned mines while supporting long-term capacity and compliance.
Dredging and reuse of contaminated sediments
Embraport used dewatered contaminated sediments as structural fill within its terminal platform, saving 400,000 m3 of imported material and reducing earthfill platform costs by 20% to 30%.
MSW incineration and power plant platform, Yuxi City, Yunnan Province, China
A USD 50 million MSW incineration plant in Yuxi City uses reinforced segmental block retaining walls to form platforms in rugged terrain and process up to 1,000 tonnes of waste per day while generating electricity.
Infrastructure developments in South East Asia often involve construction on soft soils, which present significant challenges. Pulau Indah in Malaysia, where Westport is located, has a subsoil consisting of very soft marine clay. The project required a stable load supporting platform for container handling and storage.
The demand for container handling and storage increased, necessitating the construction of additional load supporting platform areas. However, the soft marine clay profile made the initial platform construction challenging and costly. To create a stable platform, 1 meter (3.28 feet) of base course material was used.
The platform at Westport Pulau Indah was reconstructed using the MIRAFI® HP380a subgrade stabilization geotextile. This geotextile was placed between the soft subgrade and a reduced base course thickness of 500 millimeters (19.69 inches). The MIRAFI HP380a geotextile provided reinforcement, base course confinement, separation, and permeability, resulting in a stable load supporting platform. This solution offered cost savings for the client.
The subgrade was prepared by leveling and smoothing the surface. The MIRAFI HP380a geotextile was then placed flat and tightly without folds or wrinkles on the prepared subgrade. Adjacent rolls were joined by overlapping. The aggregate fill was placed in loose lifts of 200 to 300 mm (7.87 to 11.81 in) over the geotextile. The fill was dumped from the edge and spread outward. Finally, the aggregate fill was compacted according to project requirements.
The use of geosynthetics, such as the MIRAFI HP380a geotextile, has been proven to enhance the performance of roads and load support structures. In the Westport Pulau Indah project, the adoption of the MIRAFI HP380a geotextile with a reduced base course thickness of 500 mm (19.69 in) provided a stable load supporting platform for container handling and storage. This geotextile offered reinforcement, base course confinement, separation, and permeability, effectively improving subgrade stabilization. The solution proved to be cost-effective compared to the initial construction without geotextile, which was both expensive and unsatisfactory.